Call Pick Up:

• Call Pick Up requires changing the functionality of the # button on the analog phone. With Call Pick Up enabled, the # button no longer acts as a send key and cannot be used in the features below. To enabled this feature, please contact our support team at 763-222-1000, option 3 or email support@velocitytelephone.com.

Paging/barge:

• Dial *74 + extension (or full 10-digit number) you wish to page, followed by # (or wait for interdigit timeout; ~4 seconds). This feature requires paging to be enabled on the receiving phone.

Call Waiting:

• A call waiting tone (3 short beeps) indicates an incoming call. Toggle between the incoming and current call by pressing the FLASH button. The first call is placed on hold. Press the FLASH button to toggle between the two active calls.

Blind Call Transfer:

1. To transfer an active call, press the FLASH button. You should hear a dial tone
2. Dial *87 + extension (or full 10-digit number) you wish to transfer to, followed by # (or wait for interdigit timeout; ~4 seconds)
3. When you hear a dial tone, the transfer is complete

Attended Transfer:

Assume that caller A and B are in conversation. Caller A wants to attend transfer caller B to caller C:

1. Caller A presses the FLASH button on the analog phone and waits for a dial tone.
2. Caller A then dials caller C’s number followed by # (or wait for interdigit timeout; ~4 seconds)
3. If caller C answers the call, caller A and caller C are in a conversation. Then caller A can hang up to complete transfer
4. If caller C does not answer the call, caller A can press FLASH to resume the call with caller B

3-Way Calling:

1. While on a call, press the FLASH button. You should hear a dial tone
2. Dial the 3rd party you wish to conference in, followed by # (or wait for interdigit timeout; ~4 seconds)
3. If the 3rd party answers the call, press FLASH to conference the two lines
4. If the 3rd party does not answer the call, press FLASH to speak with the original caller
5. While in an active conference call, press FLASH to drop the 3rd party

Star Codes:

Code	Description
*30	Block outbound caller ID (for all subsequent calls).
*31	Send caller ID (for all subsequent calls)
*47	Direct IP Calling. Dial “*47” + “IP address”. No dial tone is played in the middle.
*50	Disable Call Waiting (for all subsequent calls)
*51	Enable Call Waiting (for all subsequent calls)
*67	Block Caller ID (per call). Dial “*67” + ” number ”. No dial tone is played in the middle.
*82	Send Caller ID (per call). Dial “*82” + ” number ”. No dial tone is played in the middle.
*69	Call Return Service: Dial *69 and the phone will dial the last incoming phone number received.
*70	Disable Call Waiting (per call). Dial “*70” + ” number ”. No dial tone is played in the middle.
*71	Enable Call Waiting (per call). Dial “*71” + ” number ”. No dial tone is played in the middle.
*72	Unconditional Call Forward: Dial “*72” and then the forwarding number followed by “#”. Wait for dial tone and hang up. (dial tone indicates successful forward)
*73	Cancel Unconditional Call Forward. To cancel “Unconditional Call Forward”, dial “*73”, wait for dial tone, then hang up.
*78	Enable Do Not Disturb (DND): When enabled all incoming calls are rejected.
*79	Disable Do Not Disturb (DND): When disabled, incoming calls are accepted.
*90	Busy Call Forward: Dial “*90” and then the forwarding number followed by “#”. Wait for dial tone then hang up.
*91	Cancel Busy Call Forward. To cancel “Busy Call Forward”, dial “*91”, wait for dial tone, then hang up.
*92	Delayed Call Forward. Dial “*92” and then the forwarding number followed by “#”. Wait for dial tone then hang up. *93 cancels Delayed Call Forward.